Type of document: Contract Notice
Country: United States
Aircraft Emissions CO2 Standard Support
Agency:
Department of Transportation
Official Address:
55 Broadway
Kendall Square Cambridge MA 02142-1093
Zip Code:
02142-1093
Contact:
Christine L. Guy, Contract Specialist, Phone 6174943559, Email christine.guy@dot.gov
Link:
Date Posted:
04/08/2019
Classification:
R
Contract Description:
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation No. 6913G619Q300169 is issued as a Request for Quotation (RFQ). This solicitation is being conducted in accordance with the policies and procedures prescribed in FAR Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-03, effective July 12, 2019. The NAICS Code is 541690 and the Small Business size standard is $15 million dollars. This procurement is a 100% small business set-aside.
The U.S. Department of Transportation, John A. Volpe National Transportation Systems Center (Volpe Center), Cambridge, MA, requires Aircraft Emissions CO2 Standard Support Services to resolve remaining technical work items for the CO2 emissions standard as within the Annex 16 Vol. III and the associated Environmental Technical Manual Vol. III guidance document. The work will be conducted in the form of information exchanges on teleconferences and webexes regarding procedures and methods for flight testing as well as data analysis necessary for determining airplane fuel consumption. The contractor is required to provide all requested specifications and delivery of services in accordance with the attached Statement of Work (SOW).
REQUIREMENTS/SPECIFICATIONS
The Government intends to award a firm fixed price purchase order as a result of this Combined Synopsis/Solicitation. This notice is expected to result in a single award, subject to receipt of an acceptable proposal. The Offeror’s proposal shall be prepared in accordance with Attachment 1, Instructions, Conditions, and Notice to Offerors. The Offeror’s price quotation for CLINs 00100-00400 and Optional CLINs 00500-01600 shall include a firm fixed price for each CLIN and shall be included as identified in the attached CLIN pricing sheet.
NOTICE TO OFFERORS
FAR 52.212-1, Instructions to Offerors-Commercial Items applies to this acquisition and is incorporated by reference. All Offerors must include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certification-Commercial Items (the complete provision is provided in Attachment 2). An Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certifications electronically using the System for Award Management (SAM) accessible via If the Offeror has not completed the annual representations and certifications electronically in SAM, the Offeror shall complete only paragraphs (c) through (o) of this provision. All Contractors must be registered in SAM in order to receive an award from a DOT Agency. The Government intends to award one (1) purchase order on a firm-fixed price basis as a result of this solicitation. This RFQ is expected to result in a single purchase order award, subject to receipt of an acceptable proposal. FAR Clauses and Provisions 52.212-4, Contract Terms and Conditions-Commercial Items, 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, 52.232-40, Providing Accelerated Payments to Small Business Subcontractors are hereby incorporated by reference. Additional clauses cited in 52.212-5 that apply to this acquisition are: 52.209.6, 52.219-6, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.223-18 and 52.232-33. The FAR provisions and clauses cited in this notice can be viewed at
This combined synopsis/solicitation hereby incorporates all Federal Acquisition Regulation (FAR) provisions and clauses contained herein. The offer should be addressed to the following: U.S. Department of Transportation, Volpe National Transportation Systems Center, Attn: Christine Guy, V222, 55 Broadway, Cambridge, MA 02142. The signed offer must be submitted via e-mail to Christine.guy@dot.gov by closing date of August 9, 2019 at 12:00 p.m. ET. No telephone requests will be honored. The Government will not pay for any information received. It is anticipated that an award resulting from this combined synopsis/solicitation will be made on or about August 16, 2019.
The following FAR provision is incorporated by full text:
52.217-7 Option for Increased Quantity-Separately Priced Line Item (Mar 1989)
The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within [insert in the clause the period of time in which the Contracting Officer has to exercise the option]. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree.
(End of clause)
FAR 52.204-21 Basic Safeguarding of Covered Contractor Information Systems (JUN 2016)
(a) Definitions. As used in this clause-
“Covered contractor information system” means an information system that is owned or operated by a contractor that processes, stores, or transmits Federal contract information.
“Federal contract information” means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government, but not including information provided by the Government to the public (such as on public websites) or simple transactional information, such as necessary to process payments.
“Information” means any communication or representation of knowledge such as facts, data, or opinions, in any medium or form, including textual, numerical, graphic, cartographic, narrative, or audiovisual (Committee on National Security Systems Instruction (CNSSI) 4009).
“Information system” means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information (44 U.S.C. 3502).
“Safeguarding” means measures or controls that are prescribed to protect information systems.
(b) Safeguarding requirements and procedures.
(1) The Contractor shall apply the following basic safeguarding requirements and procedures to protect covered contractor information systems. Requirements and procedures for basic safeguarding of covered contractor information systems shall include, at a minimum, the following security controls:
(i) Limit information system access to authorized users, processes acting on behalf of authorized users, or devices (including other information systems).
(ii) Limit information system access to the types of transactions and functions that authorized users are permitted to execute.
(iii) Verify and control/limit connections to and use of external information systems.
(iv) Control information posted or processed on publicly accessible information systems.
(v) Identify information system users, processes acting on behalf of users, or devices.
(vi) Authenticate (or verify) the identities of those users, processes, or devices, as a prerequisite to allowing access to organizational information systems.
(vii) Sanitize or destroy information system media containing Federal Contract Information before disposal or release for reuse.
(viii) Limit physical access to organizational information systems, equipment, and the respective operating environments to authorized individuals.
(ix) Escort visitors and monitor visitor activity; maintain audit logs of physical access; and control and manage physical access devices.
(x) Monitor, control, and protect organizational communications (i.e., information transmitted or received by organizational information systems) at the external boundaries and key internal boundaries of the information systems.
(xi) Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.
(xii) Identify, report, and correct information and information system flaws in a timely manner.
(xiii) Provide protection from malicious code at appropriate locations within organizational information systems.
(xiv) Update malicious code protection mechanisms when new releases are available.
(xv) Perform periodic scans of the information system and real-time scans of files from external sources as files are downloaded, opened, or executed.
(2) Other requirements. This clause does not relieve the Contractor of any other specific safeguarding requirements specified by Federal agencies and departments relating to covered contractor information systems generally or other Federal safeguarding requirements for controlled unclassified information (CUI) as established by Executive Order 13556.
(c) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in subcontracts under this contract (including subcontracts for the acquisition of commercial items, other than commercially available off-the-shelf items), in which the subcontractor may have Federal contract information residing in or transiting through its information system.
1252.239-70 CYBERSECURITY REQUIREMENTS FOR UNCLASSIFIED AND SENSITIVE INFORMATION TECHNOLOGY (IT) RESOURCES (JUNE 2012)
(a) Required Policies and Regulations – Compliance with applicable Federal statutes, policies, standards, and guidelines is the responsibility of the Federal government and may not be abdicated to the Contractor. To achieve such compliance, the government requires the Contractor to conform to all U. S. Department of Transportation (DOT) and applicable Federal IT Security statutes, policies, standards, and reporting requirements, including, but not limited to:
(1) Federal Information Security Management Act (FISMA) of 2002, 44 U.S.C § 3541 et seq.
(2) Clinger-Cohen Act of 1996 also known as the “Information Technology Management Reform Act of 1996,” 40 U.S.C § 1401 et seq.
(3) Privacy Act of 1974, 5 U.S.C. § 552a, as amended.
(4) Office of Management and Budget (OMB) Circular A-130, “Management of Federal Information Resources,” and Appendix III, “Security of Federal Automated Information Systems,” as amended.
(5) OMB Memorandum M-04-04, “E-Authentication Guidance for Federal Agencies.”
(6) Homeland Security Presidential Directive (HSPD-12), “Policy for a Common Identification Standard for Federal Employees and Contractors,” August 27, 2004.
(7) DOT Order 1351.37, “Departmental Cybersecurity Policy.”
(8) DOT Departmental Cybersecurity Compendium “Supplement to DOT Order 1351.37: Departmental Cybersecurity Policy.”
(9) DOT Order 1681.1, “Department of Transportation (DOT) Implementation Policy for Identity, Credential, and Access Management (lCAM) and Homeland Security Presidential Directive – 12 (HSPD-12).”
(10) National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) Publication (PUB) 140, “Security Requirements for Cryptographic Modules.”
(11) NIST FIPS PUB 199, “Standards for Security Categorization of Federal Information and Information Systems.”
(12) NIST FIPS PUB 200, “Minimum Security Requirements for Federal Information and Information Systems.”
(13) NIST FIPS PUB 201, “Personal Identity Verification (PIV) of Federal Employees and Contractors” and all related NIST Special Publications.
(14) NIST Special Publication 800-18, “Guide for Developing Security Plans for Federal Information Systems.”
(15) NIST Special Publication 800-30, “Risk Management Guide for Information Technology Security Risk Assessment Procedures for Information Technology Systems.”
(16) NIST Special Publication 800-34, “Contingency Planning Guide for Information Technology Systems.”
(17) NIST Special Publication 800-37, “Guide for the Security Certification and Accreditation of Federal Information Systems.”
(18) NIST Special Publication 800-47, “Security Guide for Interconnecting Information Technology Systems.”
(19) NIST Special Publication 800-53, “Recommended Security Controls for Federal Information Systems.”
(20) NIST Special Publication 800-53A, “Guide for Assessing the Security Controls in Federal Information Systems.”
(21) NIST Special Publication 800-63, “Electronic Authentication Guidance.”
(b) Applicability – The Contractor shall be responsible for Information Technology security for all systems connected to a DOT network operated by the Contractor for DOT, or for Contractor Systems that contains DOT information regardless of location. The term Information Technology, as used in this clause, means any equipment or interconnected system or subsystem of equipment used in the automatic acquisition, storage, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information. For purposes of this definition, equipment is used by DOT whether DOT uses the equipment directly or it is used by a contractor under a contract with the agency which (1) requires the use of such equipment or (2) requires the use, to a significant extent, of such equipment in the performance of a service or the furnishing of a product. Information Technology includes computers, ancillary equipment, software, firmware and similar procedures, services (including support services), and related resources. It does not include any equipment acquired by a Federal contractor incidental to a Federal contract.
(c) Security Categorization – In accordance with FIPS 199, “Standards for Security Categorization of Federal Information and Information Systems,” DOT has determined that the security category of the information or information system under this contract is Confidentiality [Indicate LOW, MODERATE, or HIGH)], Integrity [Indicate LOW, MODERATE, or HIGH)], Availability [Indicate LOW, MODERATE, or HIGH)] with an overall security impact level of [Indicate LOW, MODERATE, or HIGH)].
(d) Baseline Security Controls and System Security Plan – The Contractor shall develop and maintain the System Security Plan and associated Baseline Security Controls for the system as defined in the DOT Departmental Cybersecurity Compendium. To aid DOT senior officials and Contractors in determining applicable security controls, the Departmental Cybersecurity Compendium assigns security requirements (also referred to as controls and policy) to the DOT Component and Information System levels. The Contractor is responsible for all “System-level” security requirements in accordance with the FIPS PUB 199 Categorization approved for the system unless otherwise indicated in the Statement of Work or Performance Work Statement. The Contractor shall follow DOT policy and guidance specified in DOT Order 1357.31 and the Departmental Cybersecurity Compendium to appropriately tailor the set of baseline security controls and define the implementation owner of each control. The Contractor shall obtain the written approval of the System Security Plan and corresponding Baseline Security Controls from the DOT Authorizing Official or his/her designee.
(e) Information System Contingency Plan (ISCP) and Testing — The Contractor shall develop and maintain the ISCP for the system as defined in the DOT Departmental Cybersecurity Compendium. The Contractor shall regularly test the ISCP and document test results in accordance with the DOT Departmental Cybersecurity Compendium.
(f) Security Assessment and Authorization – All applicable Contractor systems/applications must support risk management processes, and produce and maintain the documents and artifacts as specified in the DOT Departmental Cybersecurity Policy and the DOT Departmental Cybersecurity Compendium. The Contractor shall prepare and submit the required documents as specified in the Deliverables section of the contract. For systems categorized as High or Moderate security impact per FIPS PUB 199, the Contractor must obtain a qualified independent Security Control Assessor and obtain the approval of this assessor from the DOT Authorizing Official. The Contractor may not begin the processing of DOT information, interconnecting with DOT networks or systems, or any other production operation of the system until the DOT Authorizing Official grants security authorization in accordance with DOT policy and procedures specified in the Departmental Cybersecurity Policy and Compendium.
(g) Continuous Monitoring – Upon attainment of security authorization from the DOT Authorizing Official, the Contractor must implement and perform continuous monitoring of the security state and controls of the information system as specified in the Departmental Cybersecurity Policy and Compendium producing the specified reports and other artifacts to demonstrate ongoing risk management.
(h) Contract Compliance – Upon approval by DOT, the Systems Security Plan, FIPS 199 Categorization, Contingency Plan, Security Assessment Report, Security Authorization, Plan of Action and Milestones (including any required updates), and other documents that are required based on the type of information system in accordance with the Departmental Cybersecurity Policy and Compendium, shall be incorporated into the contract file as compliance documents.
(i) Availability of Data, Documents and Access –
(1) The Contractor shall ensure that all DOT data remains within the United States except as approved in writing by the DOT Authorizing Official or his/her designee.
(2) The Contractor shall provide DOT (or DOT- designated third party contractors) access to the Contractor’s and subcontractors’ facilities, installations, operations, documents, records, databases, and personnel used in performance of the contract. The Contractor shall have the means to support DOT’s request for access 24 hours per day, 7 days per week which may be necessitated due to a security incident, breach or other security matter.
(3) The Contractor shall provide access to the extent required to carry out IT security inspections, investigations, and/or audits to safeguard against threats and hazards to the integrity, availability, and confidentiality of DOT information or to the functions of information technology operated on behalf of DOT, and to preserve evidence of criminal activity.
(4) Upon termination of the contract or earlier, upon request, the Contactor shall provide to the DOT Authorizing Official or his/her designee all DOT data, source code, or database files, in a format specified by the DOT Authorizing Official or his/her designee.
(j) Monthly Deliverables: The Contractor shall provide, on a monthly basis, the following information in NIST Security Content Automation Protocols (SCAP) XML data formats:
(1) Device inventory (type of device and software);
(2) Medium and High Vulnerabilities for each device;
(3) Deviations from approved Configuration Baselines for each device; and
(4) Additional information as required by OMB or the Department of Homeland Security (DHS) as indicated in the Departmental Cybersecurity Compendium.
(k) Quarterly Deliverables: The Contractor shall provide, on a quarterly basis, the following information in a format specified by the COTR:
(1) Plan of Action and Milestones (POA&M) – The Contractor shall prepare a draft of the POA&M associated with known weaknesses at the completion of the initial security assessment. The Contractor shall collaborate with the DOT System Owner, Information System Security Officer/Manager (ISSO/ISSM) and DOT Authorizing Official to obtain necessary information to complete the POA&M to meet DOT guidelines specified in the DOT Departmental Compendium. The POA&M approved by the DOT Authorizing Official shall be included in the initial authorization package. Upon entering Continuous Monitoring phase, the Contractor shall update the POA&M at least quarterly to ensure it contains all known system security weaknesses discovered through security assessment, continuous monitoring, internal and external audits, and related activities that examine security and IT controls of the contractor information system. The POA&M update shall also include progress on corrective actions for weaknesses previously identified.
(l) Annual Deliverables: The Contractor shall provide, on an annual basis, the following documents to the contracting officer and COTR:
1. Updated security risk management documentation:
a. System Security Plan – The Contractor shall review and update the System Security Plan at least annually to ensure the plan is current, accurately describes implemented system controls and reflects changes to the Contractor system and its environment of operation.
b. Security Assessment Report – The Contractor shall provide an update to the Security Assessment Report, based on the results of continuous monitoring performed. For systems categorized as High and Moderate security impact level, the independent Security Control Assessor must issue this report.
c. Information System Contingency Plan (ISCP) – The Contractor shall provide an annual update to the ISCP completed in accordance the Departmental Cybersecurity Compendium.
d. FIPS PUB 199 Categorization – The Contractor shall provide an update to the FIPS PUB 199 Categorization which shall identify any and all information type changes and resulting security impact levels for Confidentiality, Integrity and Availability in accordance with the DOT Departmental Cybersecurity Compendium. The DOT Authorizing Official must approve all changes in FIPS PUB categorization.
2. Information Security Awareness and Training Records – The Contractor shall ensure its personnel complete both general awareness training and role-based training for personnel that perform roles deemed by DOT to require annual specialized security training (refer to Compendium Appendix D). The Contractor shall comply with awareness and training policy specified in the DOT Departmental Cybersecurity Compendium and evidence of completion of training shall be provided to the COTR upon request by the Government.
3. Information System Interconnection Agreements – The Contractor shall identify all interconnections between its system and other parties. (Refer to the DOT Departmental Cybersecurity Compendium for definitions and requirements for documentation, security controls and authorization of interconnections).
4. All Other Applicable Documents as Specified in the Departmental Cybersecurity Compendium.
(m) HSPD-12 / Identity, Credential and Access Management Requirements – The Contractor shall ensure, at a minimum, that all systems that it develops for or operates on behalf of the Government support the use of Personal Identity Verification (PIV) smart cards, and PIV interoperable (PIV-I) smart cards as appropriate, for authentication and access to those systems, for the digital signature of documents and workflows, and for the encryption of documents and information, in accordance with NIST PUB 201 and related special publications. When explicitly required, or by September 30, 2012, whichever occurs earlier, the Contractor shall ensure that all systems it develops for or operates on behalf of the Government meet applicable DOT policy requirements for identity, credential, and access management (ICAM) and require the use of a PIV card or PIV-I for authentication, access, digital signature, and encryption. The Contractor shall ensure that services and products it purchases involving facility or system access control are on the current FIPS 201 Approved Products List, found at
(n) US Government Configuration Baseline – The Contractor shall certify applications are fully functional and operate correctly as intended on systems using the US Government Configuration Baseline (USGCB). This includes Internet Explorer configured to operate in Windows. The standard installation, operation, maintenance, updates, and/or patching of software shall not alter the configuration settings from the approved USGCB configuration. The information technology should also use the Windows Installer Service for installation to the default “program files” directory and should be able to silently install and uninstall. Applications designed for normal end users shall run in the standard user context without elevated system administration privileges. The Contractor shall use Security Content Automation Protocol (SCAP) validated tools with USGCB Scanner capability to certify their products operate correctly with USGCB configurations and do not alter USGCB settings, and shall provide documentation of such validation to the Government as a prerequisite for Government acceptance of the Contractor’s products. The Contractor shall follow guidance in the DOT Departmental Cybersecurity Compendium for tracking and reporting deviations from these baselines.
(o) System Access Notice – The Contractor shall implement DOT- approved warning banners on all DOT systems (both public and private) operated by the Contractor prior to allowing authenticated access to the system(s). The DOT Departmental Cybersecurity Compendium specifies requirements for this warning banner and permitted deviations depending on the end user device.
(p) Privacy Act Notifications – As prescribed in the Federal Acquisition Regulation (FAR) clause 24.104, if the system involves the design, development, or operation of a system of records on individuals, the Contractor shall implement requirements in FAR clause 52.224-1, “Privacy Act Notification” and FAR clause 52.224-2, “Privacy Act.” The Contractor shall ensure that the following banner is displayed on all DOT systems that contain Privacy Act information operated by the Contractor prior to allowing anyone access to the system:
“This system contains information protected under the provisions of the Privacy Act of 1974 (Public Law 93-579). Any privacy information displayed on the screen or printed shall be protected from unauthorized disclosure. Individuals who violate privacy safeguards may be subject to disciplinary actions, a fine of up to $5,000, or both.”
(q) Non-Disclosure Agreements – The Contractor shall cooperate in good faith in defining non-disclosure agreements that other third parties must sign when acting as the Federal government’s agent.
(r) Nondisclosure of Security Safeguards – In accordance with the Federal Acquisitions Regulations (FAR) clause 52.239-1, the Contractor shall be responsible for the following privacy and security safeguards: the Contractor shall not publish or disclose in any manner, without the contracting officer’s written consent, the details of any safeguards either designed or developed by the Contractor under the contract. If new or unanticipated threats or hazards are discovered by either the Government or the Contractor, or if existing safeguards have ceased to function, the discoverer shall immediately bring the situation to the attention of the other party.
(s) Subcontracts – The Contractor shall incorporate the substance of this clause in all subcontracts that meet the conditions described in paragraph (b).
SOLICITATION PROVISIONS
The provisions listed below are incorporated either in full text or by reference in the solicitation. Please include the completed representations and certifications with your quote or offer. NOTE: These provisions will not be included in any resulting award.
FAR 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (Feb 1998)
This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): www.acquisition.gov
52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)
52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016)
52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL ITEMS (OCT 2018)
The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u)) of this provision.
(a) Definitions. As used in this provision–
“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.
“Forced or indentured child labor” means all work or service-
(6) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or
(7) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.
“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.
“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.
“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).
“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except-
(1) PSC 5510, Lumber and Related Basic Wood Materials;
(2) Product or Service Group (PSG) 87, Agricultural Supplies;
(3) PSG 88, Live Animals;
(4) PSG 89, Subsistence;
(5) PSC 9410, Crude Grades of Plant Materials;
(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;
(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;
(8) PSC 9610, Ores;
(9) PSC 9620, Minerals, Natural and Synthetic; and
(10) PSC 9630, Additive Metal Materials.
“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.
“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.
“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-
(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;
(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;
(3) Consist of providing goods or services to marginalized populations of Sudan;
(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;
(5) Consist of providing goods or services that are used only to promote health or education; or
(6) Have been voluntarily suspended.
Sensitive technology-
(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-
(i) To restrict the free flow of unbiased information in Iran; or
(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and
(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).
“Service-disabled veteran-owned small business concern”-
(1) Means a small business concern-
(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and
(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.
(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).
“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.
“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that–
(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by–
(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and
(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and
(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.
“Subsidiary” means an entity in which more than 50 percent of the entity is owned-
(1) Directly by a parent corporation; or
(2) Through another subsidiary of a parent corporation.
“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.
“Veteran-owned small business concern” means a small business concern-
(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and
(2) The management and daily business operations of which are controlled by one or more veterans.
“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in
the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.
“Women-owned small business concern” means a small business concern —
(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and
(2) Whose management and daily business operations are controlled by one or more women.
“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.
(b)
(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.
(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications–Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __. [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]
(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.
(1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern.
(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern.
(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern.
(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.
(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern.
Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.
(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-
(i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.
(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-
(i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and
(ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.
(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern.
(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:
___________________________________________
(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–
(i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and
(ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.
(d) Representations required to implement provisions of Executive Order 11246 —
(1) Previous contracts and compliance. The offeror represents that —
(i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and
(ii) It [_] has, [_] has not, filed all required compliance reports.
(2) Affirmative Action
Compliance. The offeror represents that —
(i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or
(ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.
(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.
(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American – Supplies, is included in this solicitation.)
(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American-Supplies.”
(2) Foreign End Products:
LINE ITEM NO. COUNTRY OF ORIGIN
[List as necessary]
(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.
(g)
(1) Buy American — Free Trade Agreements — Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American — Free Trade Agreements — Israeli Trade Act, is included in this solicitation.)
(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American–Free Trade Agreements–Israeli Trade Act.”
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American-Free Trade Agreements-Israeli Trade Act”:
Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:
LINE ITEM NO. COUNTRY OF ORIGIN
[List as necessary]
(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled “Buy American-Free Trade Agreements-Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.”
Other Foreign End Products:
LINE ITEM NO. COUNTRY OF ORIGIN
[List as necessary]
(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.
(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American-Free Trade Agreements-Israeli Trade Act”:
Canadian End Products:
Line Item No.:
___________________________________________
[List as necessary]
(3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled “Buy American–Free Trade Agreements–Israeli Trade Act”:
Canadian or Israeli End Products:
Line Item No.: Country of Origin:
[List as necessary]
(4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:
(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American-Free Trade Agreements-Israeli Trade Act”:
Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:
Line Item No.: Country of Origin:
[List as necessary]
(5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)
(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled “Trade Agreements.”
(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.
Other End Products
Line Item No.: Country of Origin:
[List as necessary]
(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for
such products are insufficient to fulfill the requirements of the solicitation.
(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals–
(1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;
(2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and
(3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and
(4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.
(i) Taxes are considered delinquent if both of the following criteria apply:
(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.
(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.
(ii) Examples.
(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights.
(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.
(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.
(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).
(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).]
(1) Listed End Product
Listed End Product: Listed Countries of Origin:
(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.]
[_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.
[_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.
(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-
(1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or
(2) [_] Outside the United States.
(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.]
(1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that-
(i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;
(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and
(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers.
(2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that-
(i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;
(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii));
(iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and
(iv) The compensation (wage and frin
ge benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers.
(3) If paragraph (k)(1) or (k)(2) of this clause applies-
(i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and
(ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause.
(l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.)
(1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS).
(2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror’s relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror’s TIN.
(3) Taxpayer Identification Number (TIN).
[_] TIN:_____________________.
[_] TIN has been applied for.
[_] TIN is not required because:
[_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;
[_] Offeror is an agency or instrumentality of a foreign government;
[_] Offeror is an agency or instrumentality of the Federal Government;
(4) Type of organization.
[_] Sole proprietorship;
[_] Partnership;
[_] Corporate entity (not tax-exempt);
[_] Corporate entity (tax-exempt);
[_] Government entity (Federal, State, or local);
[_] Foreign government;
[_] International organization per 26 CFR 1.6049-4;
[_] Other ____________________.
(5) Common parent.
[_] Offeror is not owned or controlled by a common parent:
[_] Name and TIN of common parent:
Name ____________________________________
TIN ______________________________________
(m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan.
(n) Prohibition on Contracting with Inverted Domestic Corporations-
(1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.
(2) Representation. The offeror represents that-
(i) It [ ] is, [ ] is not an inverted domestic corporation; and
(ii) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation.
(o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran.
(1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov.
(2) Representation and Certification. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror-
(i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran;
(ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and
(iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran’s Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50(U.S.C. 1701 et seq.) (see OFAC’s Specially Designated Nationals and Blocked Persons List at ).
(3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if-
(i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and
(ii) The offeror has certified that all the offered products to be supplied are designated country end products.
(p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a unique entity identifier in the solicitation.
(1) The Offeror represents that it [ ] has or [ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture.
(2) If the Offeror indicates “has” in paragraph (p)(1) of this provision, enter the following information:
Immediate owner CAGE code:_____________________________________________
Immediate owner legal name:______________________________________________
(Do not use a “doing business as” name)
Is the immediate owner owned or controlled by another entity:
[ ] Yes or [ ] No.
(3) If the Offeror indicates “yes” in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:
Highest level owner CAGE code:_____________________________________________
Highest level owner legal name:______________________________________________
(Do not use a “doing business as” name)
(q) Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law.
(1) As required by section 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that-
(i) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless and agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or
(ii) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.
(2) The Offeror represents that–
(i) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exh
austed or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and
(ii) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.
(r) Predecessor of Offeror. (Applies in all solicitations that include the provision at 52.204-16, Commercial and Government Entity Code Reporting.)
(1) The Offeror represents that it [ ] is or [ ] is not a successor to a predecessor that held a Federal contract or grant within the last three years.
(2) If the Offeror has indicated “is” in paragraph (r)(1) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):
Predecessor CAGE code ______(or mark “Unknown).
Predecessor legal name: _________________________.
(Do not use a “doing business as” name).
(s) Reserved.
(t) Public Disclosure of Greenhouse Gas Emissions and Reduction Goals. Applies in all solicitations that require offerors to register in SAM (52.212-1(k)).
(1) This representation shall be completed if the Offeror received $7.5 million or more in contract awards in the prior Federal fiscal year. The representation is optional if the Offeror received less than $7.5 million in Federal contract awards in the prior Federal fiscal year.
(2) Representation. [Offeror to check applicable block(s) in paragraph (t)(2)(i) and (ii)].
(i) The Offeror (itself or through its immediate owner or highest-level owner) [ ] does, [ ] does not publicly disclose greenhouse gas emissions, i.e., makes available on a publicly accessible Web site the results of a greenhouse gas inventory, performed in accordance with an accounting standard with publicly available and consistently applied criteria, such as the Greenhouse Gas Protocol Corporate Standard.
(ii) The Offeror (itself or through its immediate owner or highest-level owner) [ ] does, [ ] does not publicly disclose a quantitative greenhouse gas emissions reduction goal, i.e., make available on a publicly accessible Web site a target to reduce absolute emissions or emissions intensity by a specific quantity or percentage.
(iii) A publicly accessible Web site includes the Offeror’s own Web site or a recognized, third-party greenhouse gas emissions reporting program.
(3) If the Offeror checked “does” in paragraphs (t)(2)(i) or (t)(2)(ii) of this provision, respectively, the Offeror shall provide the publicly accessible Web site(s) where greenhouse gas emissions and/or reduction goals are reported:_____.
(u)
(1) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions), Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with an entity that requires employees or subcontractors of such entity seeking to report waste, fraud, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.
(2) The prohibition in paragraph (u)(1) of this provision does not contravene requirements applicable to Standard Form 312 (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information.
(3) Representation. By submission of its offer, the Offeror represents that it will not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General).
(End of Provision)
Response Date:
080919
Sol Number:
6913G619Q300169
